On a 350x350 background is a 89x200 sunflower image (centered)

To decide the parameters of how large you want your first round rectangle, at the Paint section:

1. Click upper NW corner of how _far in_ you want your frame to start. This is the _1st number_. How _far down_ you want the top of the frame is _the 2nd number_

2. To find the _Width_ of your frame, Click the NE corner of where you want your frame to end. The width is the _1st number_ and how far down is the _2nd number_ (which should be the same as the NW)

3. To find the _Height_, click the SW corner where you want your frame to end. The height is the _1st number_ the width should be the same as the very first number.
PURPLE FRAME

+105+55
this is IN 105 and DOWN 55

+235+275
this is 235 WIDE and 275 HEIGHT

+30+30
this will make a 15 ribbon frame

so your string of numbers will be for a round rectangle:

+105+55 +235+275 +30+30
none in fill color, purple in stroke color, stroke width 3



GREEN FRAME

Now we move the frame up and over

+120+40 _first number is (plus) +15_
_second number is (minus) -15_

+220+290 _first number is (minus) -15_
_second number is (plus) +15_

+120+40 +220+290 +30+30

Finished Image



The same method is used to make a frame using a rectangle.

At _Draw_ choose _rectangle_ in the box, the rest is the same, except you _do NOT need_ the 3rd set of numbers used with round rectangle.

The 1st rectangle will be the _WIDEST_ then the 2nd rectangle will be the _HIGHEST_ and the corners will look 'cut out'.

BackEdge Examples